Request a quote

Custom cable harnesses built to your drawing, with fiber, copper and RF in one assembly

Send us your drawing and we build the harness to print, through first article and into production, wired into your rack or chassis if you need it.

AS9003 certified·ITAR compliant·CAGE 3BMP6

  • Front panel01MIL-DTL-38999
  • Copper02To the circuit board
  • Fiber03To the transceiver
  • RF04To the RF module

99% on time

Leonardo DRS · 2025 Service Excellence Award

Leonardo DRS gave us its 2025 Service Excellence Award for a 99% on-time delivery rating and a 99% quality rating, one of three awards among the 548 suppliers in its Naval Electronics division.

One of 12 out of 1,600

Lockheed Martin Missiles and Fire Control

Lockheed Martin Missiles and Fire Control named us one of its 12 outstanding small-business suppliers for 2021, from a supplier base of 1,600.

40 GHz tested in‑house

Four vector network analyzers · full S-parameters

We test RF assemblies up to 40 GHz with full S-parameters on our own Anritsu vector network analyzers, and higher bandwidth is available on request.

Since 1989 0 customers

Archbald, Pennsylvania

Jim Rogan and Brian Pember started Cable Associates in 1989 with a team of five, and we have built assemblies for 1,711 customers since then.

What we build

We build fiber optic, copper, RF and composite harnesses to print, from standard to extremely complex, and our engineers work with yours through design, prototype and production.

Request a quote
A gloved hand routing a harness on a build boardAn MMC very small form factor fiber connectorA grey multi-leg copper coax assembly with BNC connectorsA bundle of blue RF cable assemblies with gold connectors on an ESD benchA black sleeved military harness with a circular connector and a D-subA rack cabinet wired and assembled by Cable Associates
  • MediaFiber, copper, RF and composite
  • BuiltTo your print
  • LabsHarness prototype and engineering

What we build

A gloved hand routing a harness on a build board

Custom harnesses

We build fiber optic, copper, RF and composite harnesses to print, from standard to extremely complex, and our engineers work with yours through design, prototype and production.

Media
Fiber, copper, RF and composite
Built
To your print
Labs
Harness prototype and engineering
An MMC very small form factor fiber connector

Fiber optic assemblies

High-density trunks, breakouts, cassettes and jumpers for AI clusters, hyperscale and HPC, plus standard singlemode and multimode assemblies, all factory-terminated and performance-tested.

Connectors
MMC, MDC, CS, SN, MTP
Fiber count
1 to 144
Speeds
10G to 800G+
A grey multi-leg copper coax assembly with BNC connectors

Copper assemblies

Telecom twisted pair, 735A coax for DS3, CAT5E, 6 and 6A patch cords, and industrial, data center and power cables.

Telecom
50 and 64 position
Coax
735A DS3
Patch
CAT5E, 6 and 6A
A bundle of blue RF cable assemblies with gold connectors on an ESD bench

RF assemblies

Phase-matched sets, hand-formable assemblies and test lab cables, including our own NightHawk, Bluestar and ShadowX RF test cable lines.

NightHawk 1010
To 26.5 GHz
Bluestar
To 40 GHz
ShadowX
To 67 GHz
A black sleeved military harness with a circular connector and a D-sub

Military and aerospace

Ruggedized copper wire harnesses and fiber and RF assemblies, terminated with electrical, RF and optical military contacts.

Contacts
38999, TFOCA, M28876
Electrical
100% continuity tested
Fiber
Loss, interferometry, back reflection
A rack cabinet wired and assembled by Cable Associates

Contract manufacturing

We integrate fiber, copper and RF assemblies into rack cabinets, 1RU chassis, plug-in modules and NEMA-rated enclosures, then splice, wire and test them to your specification.

Racks
19 and 23 inch EIA
Enclosures
1RU chassis and NEMA
Optics
Laser, photodiode, transceiver

Built for defense programs and for AI data centers

Defense and aerospace

A black ruggedized harness with a circular military connector and breakout legs

ITAR compliant·AS9003·CAGE 3BMP6

  • Electrical harnesses for laser-guided missile systems
  • Fiber towed decoys
  • MUOS fiber and electrical systems
  • Fiber and splitter assemblies for Naval submarines
Request a quote

AI and hyperscale data centers

A rack-mount MTP breakout and shuffle chassis

US Conec MMC certified·VSFF·400G and 800G

  • MMC trunk assemblies for high-fiber-count backbones
  • MMC to MMC jumpers
  • MMC to MTP or LC breakouts
  • Rack-mount MTP and MPO breakout and shuffle chassis
Request a quote

From your drawing to shipment

We work from a 50,000 sq ft facility in Archbald, Pennsylvania, with a team of more than 150.

  1. 01
    Engineering and assembly benches in the Archbald facility

    RFQ and engineering review

    Engineering reviews your RFQ and drawing, then builds the bill of materials and the statement of work.

  2. 02
    A dual-head 3D printer used for fiber fixtures

    Proof of concept and prototype

    Prototypes come out of our harness prototype labs, with fixtures we print in-house on our 3D printers.

  3. 03
    An inspection station with a fiber end-face image on screen

    First article

    First article verification on standard or AS9102B forms, approved before volume pricing and scheduling.

  4. 04
    The Cable Associates production floor with technicians at long benches

    Build

    Volume production in ESD-controlled labs with humidity control, checked against your drawing revision.

  5. 05
    A DORC interferometer on a test bench

    Fiber test

    Fiber assemblies are tested for insertion loss, interferometry and back reflection.

  6. 06
    A Tenney chamber at the VNA thermal temperature testing station

    RF and temperature test

    RF assemblies can go through oven temperature cycle testing with RF switching.

  7. 07
    A test station with a monitor and test instrument

    Electrical test

    Every electrical assembly is tested 100% for continuity and signal integrity.

  8. 08
    A wrap-around label machine on a bench

    Label and ship

    Labeled and shipped with the assembly and test documentation you ask for.

Send your drawing to our engineering team for a quote

Our engineering team, led by Wayne K. Patrick, VP Engineering, reviews each RFQ and drawing and works with yours on design, prototypes and production.